SM Dry Wall Screws

Short Description

Brand:- HP or any general.

Gypsum board needs a screw that sits flush without tearing through the paper face, and that's the job this fastener handles. An SM Dry Wall Screw is built with a fine thread and a self-drilling point, making it suited for fixing drywall onto metal stud framing rather than timber. The bugle-shaped head sinks slightly below the board surface during driving, leaving a clean, paintable finish without cracking the gypsum around the fixing point. Since metal studs don't need the aggressive thread pitch that wood requires, the finer thread here grips the metal cleanly while still holding the drywall securely in place.

Material: Hardened Carbon Steel
Thread Type: Fine thread suited for metal stud engagement
Point Type: Self-drilling point for standard metal gauges
Size Range: 3.5mm to 4.2mm diameter, in various lengths
Head Type: Bugle head with Phillips drive
Surface Finish: Black Phosphate coating as standard
Standards: ASTM and applicable drywall construction specifications

Key Features

Fine thread designed specifically for metal stud framing
Self-drilling point that penetrates metal without pre-drilling
Bugle head shape prevents tearing of the gypsum board surface
Sinks slightly below the surface for a smooth, paintable finish
Sharp point variant available for lighter gauge metal track
Black phosphate coating for a clean appearance under paint
Suitable for use with standard or drywall-specific screw guns
Consistent driving depth for uniform board fixing

Applications of SM Dry Wall Screws

Interior partition wall construction
False ceiling and gypsum board installation
Office and commercial interior fit-outs
Residential drywall partitioning
Metal stud framing systems
Acoustic wall panel installation
Retail store interior construction
Hospital and institutional interior partitions
Modular office cabin construction
General gypsum board fixing work

Advantages of SM Dry Wall Screws

Drives cleanly into metal studs without pre-drilling
Prevents tearing or cracking of the gypsum board surface
Leaves a smooth, paintable finish at each fixing point
Reduces installation time on large partition projects
Provides consistent holding strength across board joints
Suitable for both single and double-layer drywall installations

Why Choose Genuine Enterprises

Genuine Enterprises supplies SM Dry Wall Screws manufactured for the specific demands of metal stud drywall construction, where the wrong screw can lead to board damage or poor holding strength. Each batch is checked for point sharpness and thread consistency before it reaches our customers.

Interior contractors and drywall installers across the country rely on us as an SM Dry Wall Screws supplier in India, since we stock a range of lengths suited to different board thicknesses and stud gauges. Our team is also available to help identify the correct screw type for specific partition or ceiling assemblies.

1.What is an SM Dry Wall Screw used for?
It's used to fix gypsum board onto metal stud framing, commonly seen in partition walls, false ceilings, and interior fit-out projects.

2. Can these screws be used on wood studs instead of metal?
They're designed specifically for metal stud framing, since the fine thread pitch is suited to metal rather than the coarser thread typically needed for wood.

3. Do these screws require pre-drilling into metal studs?
No, the self-drilling point allows the screw to penetrate standard metal stud gauges directly without any pre-drilling.

4. Why does the head sink below the drywall surface?
The bugle-shaped head is designed to sit slightly below the board surface, allowing for a smooth, paintable finish once the joint is filled.

5. What sizes are commonly available for these screws?
SM Dry Wall Screws typically range from 3.5mm to 4.2mm in diameter, with lengths varying based on the board thickness and framing being used.