Sleeve Anchor
- Sleeve Anchor for push through installation.
- For these anchor cylindrical conical hole is made with an uncut drill bit.
- The Sleeve is driven or pushed over the cone shaped bolt with a setting tool which takes the grip in the concrete
Maximum recommended loads for each of the Sleeve Anchor with large axial spacing
and edge distance.
| Recommended Load | FIS M6 | FIS M8 | FIS M10 | FIS M12 | FIS M16 |
| Non-cracked concrete | |||||
| Tensile Load [kN] | 6.0 | 8.5 | 10.0 | 16.0 | 20.0 |
| Shear Load [kN] | 4.5 | 7.0 | 7.5 | 9.6 | 15.5 |
- Machines
- Staircases
- Railings
- Consoles
- Ladders
- Cable trays
- Gates
- Facades
- Window elements
- Steel Constructions
- Wood constructions
