NON-MARRING VERTICAL PLATE LIFTING CLAMP
Non –marring clamp are designed for vertical lifting and transporting of plate material. This particular range of clamps has a large jaw capacity that enables it to be used on a multitude of applications. The main feature of the non-marring plate clamps is the fact that it is non-marking, this is achieved by a special material on the jaw. These plate clamps are service-friendly, making it easy to exchange parts, which are readily available. Clamp repairs are available through the factory.
Do’s & Don’ts
- DO NOT use on smooth polished surfaces.
- DO clean the pads regularly, clean in water only.
- DO NOT use the clamp on plates with surface contamination
- DO NOT use single clamp.
- DO inspect the clamp before each use. If pads are cut or can not be cleaned, take clamp out of service and replace pads
| Model | WLL (ton) | Jaw opening (mm) | A | B | C | D | E |
| VPLMNC-3 | 3 | 10-35 | 401 | 281 | 321 | 92 | 244 |
| VPLMNC-5 | 5 | 10-40 | 420 | 310 | 353 | 125 | 260 |
| VPLMNC-6 | 6 | 10-50 | 460 | 350 | 382 | 140 | 260 |
